Stainless steel worktop 198 cm CLASSIC

Weight 35 kg.
Depth 480 mm, width 1985 mm, height 30 mm.
As the edges of the boards are straight, the joint is very small if you want to place two boards next to each other.
The board turns your interior into a stylish and sturdy workbench.

The shelf is only compatible with our Classic series cabinets.

Scratches will appear on the disc, and as with all stainless steel discs, the disc must be “broken in” over time.

Superficial scratches may appear on the disc and are not considered a defect in the product.

The worktop should be screwed in place from underneath through the holes in the top of each floor cabinet using the 4 screws supplied with each floor cabinet.

Ensure that all floor cabinets are level using the screw feet before installing the worktop.

To screw the panel into floor cabinets with drawers, the drawer(s) must be removed in order to access the cabinet with a screwdriver. This is done by pressing in the small black plastic arms on the drawer slides and then carefully pulling out the drawer so that it comes loose.